玻璃门应用不简单需掌握相关要点
虽然我们对玻璃门并不陌生,但是玻璃门一旦出现问题,影响会非常大,无法合理使用。所以,玻璃门的应用并不简单,我们要掌握一些使用要点,一起来看看吧!
Although we are not unfamiliar with glass doors, once glass doors have problems, the impact will be very large and can not be used reasonably. Therefore, the application of glass doors is not simple. We need to master some key points. Let's have a look!
1、当有人离开感应玻璃门感应器的感应区域时,感应玻璃门会延迟1-10秒后自动关闭(时间长短可以通过感应玻璃门开关的参数设置),以及感应玻璃门动作平稳无碰撞。
1. When someone leaves the sensing area of the sensing glass door sensor, the sensing glass door will automatically close after a delay of 1-10 seconds (the length of time can be set by the parameters of the sensing glass door switch), and the sensing glass door will move smoothly without collision.
2、玻璃门的开启宽度可单独调节,开启宽度可设置为全部开启或部分开启宽度。
2. The opening width of the glass door can be adjusted separately, and the opening width can be set to the full opening or partial opening width.
3、按下急停按钮时,电机电路被切断,自动感应门停止。此时,可以手动推门。
3. When the emergency stop button is pressed, the motor circuit is cut off and the automatic induction door stops. At this time, the door can be pushed manually.
4、程序开关设置在“自动”或“部分开启”位置:当有人或物体进入传感器感应区域外时,门会自动打开。开启暂停时间过后,门扇自动关闭。
4. The program switch is set at the "automatic" or "partially open" position: when someone or object enters outside the sensor sensing area, the door will open automatically. After the opening pause time, the door leaf will close automatically.
5、当人从门外或门内以正常速度移动到感应门时,感应玻璃门自动打开,感应玻璃门移动平稳,不发生碰撞;感应玻璃门打开后,当有人以正常速度通过感应玻璃门时,感应玻璃门保持打开状态。
5. When a person moves to the sensing door from outside or inside the door at normal speed, the sensing glass door automatically opens, and the sensing glass door moves smoothly without collision; After the inductive glass door is opened, when someone passes through the inductive glass door at normal speed, the inductive glass door remains open.
6、当济南玻璃门的门扇开启到需要的部分开启宽度时,将程序开关拨到“部分开启”位置。此时门扇停止,系统存储部分打开的门扇,然后门扇缓慢开启全开位置,开启暂停时间后门扇自动关闭。传感器门将执行部分打开功能。
6. When the door leaf of Jinan glass door is opened to the required partial opening width, turn the program switch to the "partial opening" position. At this time, the door leaf stops, the system stores the partially opened door leaf, then the door leaf slowly opens to the fully open position, and the rear door leaf automatically closes during the opening pause time. The sensor door will perform a partial open function.
7、程序开关设置为“自动”、“单向开启”或“部分开启”:当有人或物体进入感应区时,门会自动开启。开启暂停时间过后,门扇自动关闭。
7. The program switch is set to "automatic", "one-way opening" or "partial opening": when someone or object enters the sensing area, the door will open automatically. After the opening pause time, the door leaf will close automatically.
8、为了观察通过济南玻璃门的正常步行路线,将日常步行路线调整到感应玻璃门面对人的方向,而不是感应玻璃门的某个角度。
8. In order to observe the normal walking route through the glass door in Jinan, adjust the daily walking route to the direction of the sensing glass door to the person, rather than a certain angle of the sensing glass door.
上述内容中为大家介绍了8个使用济南玻璃门的关键点,大家在使用的时候希望大家能够牢牢的掌握这8个关键点,希望能够帮助到大家。更多内容就来关注我们网站www.jnkdblgd.com了解咨询吧!
The above content introduces 8 key points for using Jinan glass doors. We hope you can firmly grasp these 8 key points when using them and help you. For more information, please follow our website www.jnkdblgd Learn about consulting. Com!
下一篇:造成部分玻璃对流传递能量的流失的因素 上一篇:玻璃安装在办公空间的技巧
产品
资讯
- 2023-06-26 感应门正常情况介绍与运用留心事项
- 2023-06-26 钢化玻璃门应如何选购和安装
- 2023-06-21 肯德基门的几个注意事项
- 2023-06-19 中空百叶玻璃隔断的组装步骤
- 2023-06-16 玻璃隔断的重复利用
- 2023-06-14 高隔间隔断的设计与整体风格要和谐搭配!
- 2023-06-12 感应门感应方式的特点
- 2023-06-09 肯德基门漏风的问题