钢化玻璃门应如何选购

How to Choose Tempered Glass Doors

1、钢化玻璃和普通玻璃是不一样的，钢化玻璃的表面将会存在蓝光的彩色条纹，如果不仔细是无法确认的。因此，在选购钢化玻璃门的时候，可以将其放置于阳光下，然后从侧面去观察，要是看到彩色条纹，则是钢化玻璃，否则就是普通玻璃。

1. Tempered glass is different from ordinary glass, and there will be colored stripes of blue light on the surface of tempered glass, which cannot be confirmed without careful consideration. Therefore, when choosing tempered glass doors, you can place them in sunlight and observe them from the side. If you see colored stripes, it is tempered glass, otherwise it is ordinary glass.

2、用手触摸钢化玻璃的表面，凭借某种感觉，也可以知道钢化玻璃的真假。主要是根据钢化玻璃表面是否凹凸、较长边是否有微小的弧度、表面是否有裂痕，判断是否为钢化玻璃。只要是表面凹凸且有微小弧度，说明是钢化玻璃。

2. By touching the surface of tempered glass with your hand and relying on a certain feeling, you can also know the authenticity of tempered glass. It is mainly based on whether the surface of tempered glass is concave and convex, whether there are small arcs on the longer edges, and whether there are cracks on the surface to determine whether it is tempered glass. As long as the surface is convex and slightly curved, it indicates tempered glass.

3、一般来说，钢化玻璃经过处理之后，都会在其表面上形成一个保护层，这个保护层可以很好的保护钢化玻璃，让其具备有坚硬、光滑、不容易碎的特点。要是发现所选择的钢化玻璃表面粗糙，则说明质量是存在问题的。

3. Generally speaking, after treatment, tempered glass forms a protective layer on its surface, which can effectively protect tempered glass, making it hard, smooth, and not easily broken. If the surface of the selected tempered glass is found to be rough, it indicates that there is a quality issue.

济南玻璃门维修安装注意事项

Precautions for maintenance and installation of Jinan glass doors

1、装置玻璃门前，要查看门窗扇是否平整，预留孔眼是否完全、精确，如果不契合要求的就应该先校正。

1. Before installing the glass door, it is necessary to check whether the door and window leaves are flat, and whether the reserved holes are complete and accurate. If they do not meet the requirements, they should be corrected first.

2、装置钢框、门扇玻璃应用钢丝卡固定，距离不得大于300mm，且每边不少于两个，也能够以在钢丝卡上抹油灰面层，以添加密封性。

2. The steel frame and door leaf glass of the device should be fixed with steel wire clamps at a distance of no more than 300mm, and there should be no less than two on each side. It is also possible to apply a putty surface layer on the steel wire clamps to add sealing.

3、如用油灰固定，则油灰应填实抹光。如用橡皮垫，应先将橡皮垫嵌入，并用压条和螺钉固定。

3. If fixed with putty, the putty should be filled and polished. If using a rubber pad, it should be embedded first and fixed with pressure strips and screws.

4、如选用压条固定，通常在四边或两头加压条，用密封胶封好。

4. If using pressure strips for fixation, usually add pressure strips on the four sides or two ends and seal them with sealant.

5、装置各种辅助材料要契合规划要求和有关规范规定。

5. The various auxiliary materials of the device should comply with the planning requirements and relevant regulations.

6、组装彩色玻璃、磨花玻璃时，应与规划图画契合，不得错位、斜曲和松动，玻璃的朝向应契合规划要求。

6. When assembling colored glass and ground glass, they should be in line with the planning drawings and should not be misaligned, skewed, or loose. The orientation of the glass should meet the planning requirements.

7、装完要做好清洁作业。

7. After installation, do a good job of cleaning.

钢化玻璃门应如何选购和安装相关事项就讲解到这里了，希望能够给您好的帮助，更多事项就来我们网站http://www.jnkdblgd.com咨询！

That's all for the selection and installation of tempered glass doors. We hope to provide you with good help. For more information, please visit our website http://www.jnkdblgd.com consulting service