In modern houses, many users begin to add many partitions in the room. For example, the glass partition in the bathroom is more common. In the living room, a glass partition is made to divide the space into two spaces as a whole, which will make the home more beautiful. Don't take it as long as there is such a glass partition in a large room, in fact, there is a large partition in a large room and a small one The method of partition, no matter how it is used, will reflect a fashion atmosphere. But how to make this kind of glass partition? Next, I will introduce the construction process and precautions of glass partition.

　　玻璃隔断其实就是在我们生活中使用玻璃来当做隔墙使空间能够合理的划分，更好的把空间区域化。玻璃隔断墙时尚美观大方,而且有透亮的作用,所以许多业主在装修的时候,常常会使用玻璃隔断。玻璃隔断的景观可以相互策应,可以让整个房间间融为一体,并且还能有一种时尚的气息味道。那么玻璃隔断施工工艺流程有哪些?在施工时应该注意哪些事情?

　　Glass partition is actually to use glass as partition wall in our life so that the space can be divided reasonably and the space can be regionalized better. Glass partition wall is fashionable, beautiful and bright, so many owners often use glass partition when decorating. Glass partition landscape can coordinate with each other, can make the whole room integrated, and can also have a fashion flavor. So what are the construction process of glass partition? What should be paid attention to during construction?

　　一.玻璃隔断施工工艺流程有哪些?

　　What is the construction process of glass partition?

　　1.测量放线:根据设计图纸尺寸来测量放线,测出图纸上的基层面的标高,玻璃墙的轴线及上、下部位,收口的不锈钢槽的位置。

　　1. Measurement and setting out: measure the setting out according to the size of the design drawing, and measure the elevation of the base course surface on the drawing, the axis of the glass wall, the upper and lower parts, and the position of the stainless steel groove of the closure.

　　2.预埋铁件下部侧边上部玻璃槽安装:根据设计图纸的尺寸安装槽底钢部件,用膨胀螺栓固定,然后安装上部、侧边钢玻璃槽。调平直,然后固定。安装槽内垫底胶带,非不锈钢件涂刷防锈漆;

　　2. Installation of the glass groove at the upper side of the lower part of the embedded iron parts: install the steel parts at the bottom of the groove according to the size of the design drawing, fix them with expansion bolts, and then install the steel glass groove at the upper part and the side. Straighten and fix. Install the bottom tape in the groove, and brush anti rust paint on non stainless steel parts;

　　3.玻璃块安装定位:钢化平板玻璃全部在专门厂家定做,运工地。将玻璃槽及玻璃块清洁干净,用玻璃安装机或托运吸盘将玻璃块安放在安装槽内,调平、竖直后用塑料块塞紧固定,同一玻璃墙全部安装调平,竖直才开始注胶;

　　3. Installation and positioning of glass block: all tempered flat glass shall be customized by special manufacturers and transported to the construction site. First, clean the glass slot and glass block, place the glass block in the installation slot with a glass installation machine or a shipping suction cup, level it and fix it with a plastic block after it is vertical, and then install and level the same glass wall, and start injecting glue when it is vertical;

　　4.注胶:清洁干净上、下部位、侧边不锈钢玻璃槽及玻璃缝注胶处,然后将注胶两侧的玻璃、不锈钢板面用白色胶带粘好,留出注胶缝位置,规定要求注胶,同一缝一次性注完刮平,不停歇。(注:a注胶缝要在干燥时才能注胶,切忌潮湿;b上、下部不锈钢槽所注的胶为结构性硅胶,玻璃块间夹缝所注的胶为透明玻璃胶)。

　　4. Glue injection: first, clean the upper and lower parts, side stainless steel glass groove and the glue injection place of the glass joint, and then glue the glass and stainless steel plate surface on both sides of the glue injection with white tape, leaving the glue injection position. According to the national regulations, glue injection is required. The same joint is completely filled and scraped at one time without stop. (Note: a glue injection joint can only be injected when it is dry, never wet; B the glue injected into the upper and lower stainless steel tanks is structural silica gel, and the glue injected into the gap between glass blocks is transparent glass glue).

　　二.玻璃隔断施工需要注意什么?

　　2、 What should we pay attention to in the construction of glass partition?

　　1、需要注意、墙体厚度以及风格色彩的问题,因为玻璃隔断墙并非承重墙,设计的时候有一点的想像空间。

　　1. We need to pay attention to the problems of wall thickness and style and color, because the glass partition wall is not a load-bearing wall, there is a little imagination space in the design.

　　2、隔断的色彩要与室内装潢基调协调一

　　2. The color of partition should be in harmony with the basic tone of interior decoration

　　3、材料的选择精心挑选和加工材料,实现优良的外象塑造与使用功能分隔到达,因此玻璃隔断终装饰效果和功能区分隔到达是材料选择的首要点。

　　3. The choice of materials is carefully selected and processed to achieve excellent image shaping and functional separation. Therefore, the final decoration effect of glass partition and the separation of functional areas are the first points of material selection.

　　4.玻璃隔断能很好将家庭居室进行划分,由于玻璃的透明度好,而且又不会让空间显得隔离、生疏。但是很多装修的业主怕玻璃易碎,伤到家人。其实这个担心有点多余,现在大多使用的是8毫米以上的钢化玻璃,其强度足够承受人体的撞击。即使碎了,也会成粒粒的状态,不会伤害到家人。

　　4. The glass partition can well divide the family room, because the transparency of the glass is good, and it will not make the space appear isolated and unfamiliar. But many decoration owners are afraid that the glass will break and hurt their families. In fact, this worry is a little superfluous. Now most of the toughened glass with a strength of more than 8mm is used, which is strong enough to bear the impact of human body. Even if it is broken, it will be in a state of granulation and will not hurt the family.

　　5.客厅和餐厅之间准备用玻璃隔断,另外装个玻璃门,玻璃隔断和玻璃门之间做好后呈120度,这么做是为了留出一条缝,避免开门的时候两块玻璃互相不碰撞!不过不会影响美观。

　　5. The living room and dining room are to be separated by glass. In addition, a glass door is to be installed. After the glass partition and glass door are finished, they will be 120 degrees. This is to leave a gap so as to avoid the two glasses not colliding with each other when opening the door. However, it will not affect the beauty.

　　6.玻璃隔断把卧室从客厅中分割开来,给我们一个宽大、时尚的的视觉空间。玻璃具有放大、区隔作用,同时拥有全透视性或半透视性功能,运用在室内能够有效地解除空间的沉重感,让住家变得轻盈起来,成为住家隔间材的常用元素之一。

　　6. The glass partition separates the bedroom from the living room, giving us a spacious and fashionable visual space. Glass has the function of amplification and separation, and also has the function of full perspective or semi perspective. When used indoors, it can effectively relieve the heavy feeling of the space, make the house lighter and become one of the common elements of the compartment materials.