玻璃制品兼顾美观与实用，既能够凭借晶莹剔透的外表惹人喜爱，又能够充分利用其坚硬耐用的物理性能。那在生活中我们经常会用到各类玻璃制品，例如玻璃门等。那么您知道更换玻璃门拉手的方法与安装步骤是怎样的吗？下面济南玻璃门厂家为您讲解：

Glass products are both beautiful and practical. They can not only attract people with their crystal clear appearance, but also make full use of their hard and durable physical properties. We often use all kinds of glass products in our life, such as glass doors. Do you know how to replace the glass door handle and how to install it? Now Jinan glass door manufacturer will explain to you:

一、更换玻璃门拉手的方法

1、 Method of replacing glass door handle

1、全玻璃门扇上玻璃门拉手孔洞，一般在裁割玻璃时加工完成，玻璃门拉手连接部分插入洞口时不能过紧，应略有松动；如插入过松，可在插入部分裹上软质胶带，

1. The glass door handle hole on the full glass door leaf is generally processed when cutting the glass. The connecting part of the glass door handle should not be too tight when inserting into the hole, but should be slightly loose; If the insertion is too loose, wrap soft adhesive tape on the insertion part,

2、安装前在玻璃门拉手插入玻璃的部分涂少许玻璃胶，拉手组装时，其根部与玻璃靠紧密后再按紧固定螺钉，以保证拉手没有松动现象，

2. Before installation, apply a little glass glue on the part where the glass door handle is inserted into the glass. When the handle is assembled, its root is close to the glass, and then press the fixing screw to ensure that the handle is not loose,

3、如果不是玻璃门钢化玻璃的话，用10mm的玻璃钻头，量出玻璃门拉手的孔距(到)，在玻璃门上标记好，浇水打孔，安装时先从外面上，在里面拧拉手的长螺丝，别把拉手的螺丝留外面了，那样能够从外面把玻璃门拉手卸掉的，

3. If it is not tempered glass of glass door, use a 10mm glass drill bit to measure the hole spacing (to) of the glass door handle, mark it on the glass door, water it and punch it. When installing, first screw the long screw of the handle from the outside, and then screw the handle from the inside. Don't leave the handle screw outside, so that the glass door handle can be removed from the outside,

二、玻璃门拉手安装步骤

2、 Installation steps of glass door handle

先需要准备的工具:螺丝刀、螺丝、笔(做记号用)

Tools to be prepared first: screwdriver, screw, pen (for marking)

一:做记号

1： Mark

先把玻璃门平放，在预先要安装玻璃门拉手(希比信)的地方做好记号，用电转装上对应规格的金刚砖头兑水打眼，此时得注意防护，以免玻璃破裂，如果不是钢化玻璃的话，就用10mm的玻璃钻头，量出拉手的孔距[中心到中心，在玻璃上标记好，浇水打孔，

First place the glass door flat, mark the place where the glass door handle (Hibison) is to be installed in advance, use electricity to install the corresponding specification of diamond brick and water to drill holes. At this time, pay attention to protection to avoid glass breakage. If it is not tempered glass, use a 10mm glass drill to measure the hole distance of the handle [center to center, mark on the glass, water and drill holes,

二:打玻璃胶

2： Apply glass glue

接着在拉手插入玻璃的部分涂少许玻璃胶，拉手组装时，其根部与玻璃靠紧密后再按紧固定螺钉，以保证拉手没有松动现象，

Then apply a little glass glue on the part where the handle is inserted into the glass. When the handle is assembled, its root is close to the glass and then press the fixing screw to ensure that the handle is not loose,

三:拧螺丝

3： Screw

较后安装拉手时先从外面上，在里面拧拉手的长螺丝，别把拉手的螺丝留外面了，那样能够从外面把拉手卸掉的，拉手连接部分插入洞口时不能过紧，应略有松动；如插入过松，可在插入部分裹上软质胶带

When installing the handle later, first screw the long screw of the handle from the outside, and do not leave the screw of the handle outside. If the handle can be removed from the outside, the connecting part of the handle should not be too tight when inserted into the hole, but should be slightly loose; If the insertion is too loose, wrap soft adhesive tape on the insertion part

玻璃门硬度可靠，容易清洁，款式大方，透明透光，不影响光线的照耀，现在不少的门市店面都是使用玻璃门，所以在注重玻璃门拉手质量同时，玻璃门拉手的安装的好坏会直接影响其美观，所以这方面还是要认真了解的，更多事项就来我们网站http://www.jnkdblgd.com咨询吧！

The glass door is reliable in hardness, easy to clean, generous in style, transparent and transparent, and does not affect the light. Now many stores use glass doors, so while paying attention to the quality of the glass door handle, the installation of the glass door handle will directly affect its beauty, so we need to understand this aspect carefully, and more matters will come to our website http://www.jnkdblgd.com Ask!