感应门普及越来越广，很多公共场合及办公室都能见到它的身影，但如果感应门出现故障怎么办呢？下面我们就来讲讲济南感应门有“吱吱声”异响怎么检测？

The induction door is becoming more and more popular, which can be seen in many public places and offices. But what if the induction door fails? Now let's talk about how to detect the "squeak" of Jinan induction door?

检测自动门扇的吊具滑轮有没有反常

Check whether the lifting pulley of the automatic door leaf is abnormal

一般感应门的吊具滑轮，会因为长期运用的原因，会呈现必定的磨损，假如仅仅比较细微的磨损的话，处理起来比较简单，能够将滑轮和轨迹进行整理一次，然后将轨迹上面的尘埃打扫洁净，当然也能够给滑轮的轴承上少量的润滑油，但在上润滑油的时分，不要在感应门的滑轮和轨迹的外表增加润滑油，这样简单粘附必定的尘埃，然后加剧损坏，别的也会使得滑轮呈现打滑现象。

Generally, the lifting tool pulley of the induction door will show certain wear due to long-term use. If it is only slightly worn, it is relatively simple to deal with it. The pulley and track can be sorted out once, and then the dust on the track can be cleaned. It can also give a small amount of lubricating oil to the pulley bearing, but when applying lubricating oil, do not add lubricating oil to the pulley and track surface of the induction door, In this way, a certain amount of dust is simply adhered, and then the damage is aggravated. Others will also make the pulley slip.

检测感应门扇底部的地轮

Detect the ground wheel at the bottom of the induction door leaf

假如感应门下面的地轮发生了损坏或许是松动的话，也简单呈现非常大的声响，假如存在这样的状况的话，要立刻进行处理，处理方式是对地轮进行加固或许是从头更换新的地轮。

If the ground wheel under the induction door is damaged or loose, it also makes a very loud noise. If such a situation exists, it should be handled immediately. The handling method is to reinforce the ground wheel or replace it with a new one.

如果出现上述性能以外的故障，如没有摩擦声，没有爆破声，门不动，这叫做莫名其妙的故障，那么先要检查电源是否开启，是否自动感应门开关是否关闭变压器是否因电压突然上升而损坏，如果不是上述故障，应先排除控制器，看是否有故障。如果控制器无故障，那么只剩下电动机，电动机是不容易的。损坏的部件，如果损坏，只能更换(更换前要排除减速器故障)。

If there is any fault other than the above performance, such as no friction sound, no blasting sound, and the door does not move, which is called an inexplicable fault, first check whether the power supply is turned on, whether the automatic induction door switch is turned off, and whether the transformer is damaged due to the sudden rise of voltage. If it is not the above fault, first remove the controller to see if there is any fault. If the controller has no fault, it is not easy to leave only the motor. Damaged components, if damaged, can only be replaced (the reducer fault should be eliminated before replacement).

如果你不了解，不要主动处理，要防止产生更多故障。对于机械故障，只要稍加用心，一般人员是完全可以处理的。更多相关内容就来我们网站http://www.jnkdblgd.com进行咨询吧！

If you don't understand, don't take the initiative to deal with it, and prevent more failures. For mechanical faults, ordinary personnel can handle them with a little care. More relevant content will come to our website http://www.jnkdblgd.com Consult!