The first step of glass door installation: after the glass door is completely removed, do not rush to install the glass door. First, make preparations. This is also an indispensable step in the door installation process. Prepare the materials required for the installation of glass door and home decoration hardware accessories. The preparation of the same tools is also indispensable, except for the preparation of materials, In order to protect the glass door, some details need to be handled

一留出玻璃限位槽，二使用手握细砂轮块对玻璃门四个角位的倒角进行缓慢磨角，三用木楔钉将木底托固定于地面之上，并用胶水将玻璃饰面粘卡在木方上，对玻璃门进行这样的处理之后，安装前的准备工作也就做好了，接下来就是进行玻璃门的安装了。

First, set aside the glass limit groove; second, use the hand-held fine grinding wheel block to grind the corners of the four corners of the glass door slowly; third, fix the wooden bottom support on the ground with wooden wedge nails, and stick the glass finish on the wood with glue. After such treatment, the preparations before installation are completed, and then the installation of the glass door is carried out. Installation effect drawing of glass door in home

玻璃门安装第二个步骤：当玻璃门安装的准备工作已完毕之后，接下来就可以进行玻璃门安装施工了，是将已经处理好的玻璃门安装于门框顶部的限位槽内，其次是放到底托上，并将整个玻璃门的位置对好安装，这样玻璃门安装到门框上了，到此玻璃门安装还没有结束，还要注入玻璃胶进行封口操作以及玻璃板件的对接操作，还有就是玻璃门拉手的安装，要想安装好玻璃门，对于这两个操作是讲究方法的，对于注入玻璃胶进行封口操作方法，将玻璃胶装入玻璃胶注射枪中.

The second step of glass door installation: after the preparation for glass door installation has been completed, the glass door installation construction can be carried out next. First, install the treated glass door in the limit slot at the top of the door frame, then put it on the bottom support, and align the position of the whole glass door for installation, so that the glass door can be installed on the door frame, So far, the installation of glass door is not over yet. It is also necessary to inject glass glue for sealing operation and docking operation of glass plates, as well as the installation of glass door handle. In order to install the glass door well, pay attention to the methods for these two operations. For the sealing operation method of injecting glass glue, put the glass glue into the glass glue injection gun

用玻璃胶枪的后压杆端头板，开始实施注射操作，挤出少量的玻璃胶注入需要封口的地方.

Use the end plate of the rear pressure bar of the glass glue gun to start the injection operation, extrude a small amount of glass glue and inject it into the place to be sealed

要保证在注射的过程中对准缝隙的封口，对于玻璃板件的对接操作方法，有的玻璃门的安装，往往不仅是使用一块玻璃板来完成的，可能需要多个玻璃板，因此就需要玻璃板间的对接，在对接的时候注意对接的缝隙要保证在2-3mm之间，当两个玻璃门对接固定后，就可以将玻璃胶注入缝隙中了，当这些都操作好之后，玻璃门也就安装好了，待玻璃胶干之后，进行清理就可以了。

To ensure that the gap is sealed in the process of injection, for the docking operation method of glass plates, the installation of some glass doors is often completed not only by using one glass plate, but also by using multiple glass plates. Therefore, the docking between glass plates is required. During the docking, pay attention to ensure that the docking gap is between 2-3mm. When the two glass doors are docked and fixed, The glass glue can be injected into the gap. After these operations are completed, the glass door will be installed. After the glass glue is dry, it can be cleaned.

以上就是今天小编给大家提供的精彩内容，更多的精彩内容请点击进入我们的网站：济南玻璃门http://www.jnkdblgd.com

The above is the wonderful content provided by Xiaobian today. For more wonderful content, please click to enter our official website: Jinan glass door http://www.jnkdblgd.com