The application of glass partition has brought business opportunities to the partition industry. At the same time, the form of partition is also overwhelming. How to choose glass partition? Let's introduce it to you. The selection of glass partition should be carried out according to the occasion. Let's have a look together!

玻璃隔断是的隔墙材料。现代装修利用了玻璃工艺，了色泽斓的装饰，让我们看1看市场上几种典型的玻璃隔断。玻璃隔断可简单分为单层玻璃隔断(单玻隔断)和双层玻璃隔断(双玻隔断。高隔间和活动隔断。

Glass partition is a kind of partition material. Modern decoration uses glass technology and colorful decoration. Let's take a look at several typical glass partitions in the market. Glass partition can be simply divided into single glass partition (single glass partition) and double glass partition (double glass partition). High compartment and movable partition.

单玻玻璃隔断即使单片玻璃做的隔断，如5-1mm钢化玻璃、彩釉玻璃、磨砂玻璃都可以，双层玻璃隔断为常见的是中空玻璃隔断加百叶。隔音好，适合议室用。下面为大家介绍几种常用的玻璃隔断。

Single glass partition even if it is made of single glass, such as 5-1mm tempered glass, colored glazed glass and frosted glass, double-layer glass partition is common, which is hollow glass partition and louver. It has good sound insulation and is suitable for conference room. Here are several common glass partitions.

活动隔断活分隔室内空间用的设施。活动隔断可将大空间分隔成小空间，以建筑空间使用功能多样化的需要。

The movable partition is a facility for separating indoor space. The movable partition can separate large space into small space to meet the needs of diversified use functions of architectural space.

拼装式活动隔断

Assembled movable partition

按使用要求可拆可装的活动隔断。由与房间顶棚同等或只有房间部分的轻质隔扇单元拼装而成。隔扇单元通常厚6～12厘米，宽60～120厘米,由木材或薄壁金属型材作框架,双面贴胶合板、纤维板或纸面石膏板。

The movable partition can be disassembled and installed according to the use requirements. It is assembled by light partition unit which is the same as the room ceiling or only part of the room. The partition unit is usually 6 ~ 12cm thick and 60 ~ 120cm wide. It is made of wood or thin-walled metal profiles as the frame, and pasted with plywood, fiberboard or paper gypsum board on both sides.

有的还在填蜂窝纸以刚度，或填矿棉等以隔声能力。与房间顶棚同等的隔断的安装法是：先在顶棚安置带凹槽的上槛，将隔扇凹槽，并在每块隔扇下面安置两个垫块或可调节的螺栓,在隔扇定位后,

Some are also filled with honeycomb paper for rigidity, or mineral wool for sound insulation. The installation method of partition equivalent to the room ceiling is: first place the upper sill with groove on the ceiling, groove the partition fan, and place two cushion blocks or adjustable bolts under each partition fan. After the partition fan is positioned,

用踢脚板压盖下部的缝隙。这种隔扇用于较长时间才变空间分隔的住宅和学校等。只有房间部分的矮隔断用矮隔扇装成。先将矮隔扇安装在能自立于地面的立柱上，

Cover the gap at the lower part with skirting board. This kind of partition fan is used for houses and schools that change space separation for a long time. Only the low partition of the room is installed with low partition fan. First, install the low partition fan on the column that can stand on the ground,

也可用螺栓或铰链将几片矮隔扇连成角度，或连成可折叠的屏风的形式。视需要而定，如用于挡住站立者的视线。

Bolts or hinges can also be used to connect several low partition fans at an angle, or in the form of foldable screens. It can be used as needed, such as to block the sight of standing people.