The sensing width scale of Jinan automatic door sensor should be greater than the width of door opening. When people go to Jinan active door at normal speed, the automatic door shall be opened actively without any strange sound, and the action of opening the door shall be smooth without bumping. When people leave the active door, the automatic door will be closed automatically after delaying for 1 to 10 seconds. The delay time can be set by the active door switch parameters.

济南感应门独特的控制体系特性具有智能化主动、随机确诊毛病，主动检测操作次序，较佳化传动特性，如主传动的加/减速，传动进程的冲突确诊，噪声等。主动门第.一次初调运转时，体系主动进行学习，门翼分量和运动冲突力的丈量成果，主动调 理到可答应的较.大转速，较.大静态力的安 全调 理，传感器可靠性测验，主动测定通道开口端的位置。

The unique control system characteristics of Jinan induction door are intelligent, active and random fault diagnosis, active detection of operation sequence, better transmission characteristics, such as acceleration / deceleration of main transmission, conflict diagnosis of transmission process, noise, etc. During the first initial adjustment and operation of the active door, the system takes the initiative to learn, the measurement results of the door wing component and motion conflict force, actively adjust to the allowable safety adjustment of larger rotating speed and larger static force, test the reliability of the sensor, and actively measure the position of the opening end of the channel.

济南感应门感应器探测到有人进入时，将脉冲信号传给主控器，主控器判别后告诉马达运转，同时监控马达转数，以便告诉马达在必定时分加力和进入慢行运转。

When Jinan induction door sensor detects someone entering, it transmits the pulse signal to the main controller. After discrimination, the main controller tells the motor to run, and monitors the motor speed, so as to tell the motor to apply force at a certain time and enter slow running.

马达得到必定运转电流后做正向运转，将动力传给同步带，再由同步带将动力传给吊具体系使门扇敞开，门扇敞开后由控制器作出判别，如需关门，告诉马达作出反向运动，封闭门扇。

After the motor obtains a certain operating current, it runs in the forward direction, transmits the power to the synchronous belt, and then the synchronous belt transmits the power to the spreader system to open the door leaf. After the door leaf is opened, the controller makes a judgment. If it is necessary to close the door, tell the motor to make a reverse movement and close the door leaf.