The installation of glass partitions is very common. More and more people choose to install partitions in the office to facilitate access. After all, glass has good partition performance and can facilitate user application, but only correct installation can better reflect its role. So, what should manufacturers pay attention to when installing doors? What details need to be considered?

1、固定隔断

1. Fixed partition

在框架组装后的预安装过程之后，隔断需要进一步固定。例如，许多螺栓需要一个接一个地固定，以防止框架中的型材移动。当然，在某些情况下需要焊 接框架，以防止框架不稳定和错位。安装隔断时，应注意保护隔断的完整性，防止隔断因外力而损坏。然后，在固定隔断之后，如果发生任何事故，需要进一步仔细检查，从而完成玻璃隔断的安装。

After the pre installation process after frame assembly, the partition needs to be further fixed. For example, many bolts need to be fixed one by one to prevent the profile in the frame from moving. Of course, in some cases, it is necessary to weld the frame to prevent instability and dislocation of the frame. When installing the partition, pay attention to protect the integrity of the partition and prevent the partition from being damaged by external forces. Then, after fixing the partition, in case of any accident, further careful inspection is required to complete the installation of the glass partition.

2、安装前，组装框架

2. Assemble the frame before installation

当隔断被用作隔板时，因为它是一种易碎的材料，它需要一个坚固的框架来保护它。可以在安装隔板之前预先安装框架，并且可以在平坦的地面上组装和形成整个或部分结构，以便于安装和固定。当然，如果隔板的安装面积相对较大，不适合预先安装隔板，可以沿地面、墙面和中间位置安装框架。固定地面、墙壁和顶部，然后逐步安装隔断。安装框架时，应注意对准一开始绘制的位置线，以免安装错误。

When the partition is used as a partition, because it is a fragile material, it needs a strong frame to protect it. The frame can be installed in advance before installing the diaphragm, and the whole or part of the structure can be assembled and formed on a flat ground to facilitate installation and fixation. Of course, if the installation area of the diaphragm is relatively large and it is not suitable to install the diaphragm in advance, the frame can be installed along the ground, wall and middle position. First fix the floor, wall and top, and then gradually install the partition. When installing the frame, pay attention to align the position line drawn at the beginning to avoid installation errors.

3、安装先定位尺寸

3. Positioning dimension before installation

每一次装修都会涉及到尺寸，玻璃隔断的安装也不例外。在设计之初，有必要确定安装的具体 位置，一旦位置清楚，就开始测量尺寸。在安装地面上画一条定位线，然后在墙面或柱子上画一个高水平的位置线。画线时，注意尽量减少误差，以免给安装程序带来不必要的麻烦。需要反复复核现场的实际尺寸，以保证安装位置的准确性和选材尺寸的准确性。

Every decoration will involve size, and the installation of glass partition is no exception. At the beginning of design, it is necessary to determine the specific installation position. Once the position is clear, start measuring the size. First draw a positioning line on the installation ground, and then draw a high-level position line on the wall or column. When drawing lines, pay attention to minimize errors to avoid unnecessary trouble to the installation program. The actual dimensions of the site shall be rechecked repeatedly to ensure the accuracy of installation position and material selection dimensions.

这是玻璃隔断安装中需要注意的一些细节处理方法，相信经过上述介绍大家对门有了一定的了解。建议您在购买时多注意比较，选择质量好、售后服务好的厂家进行安装，方便后期的使用，以免买到劣质产品，不利于使用。

These are some details that need to be paid attention to in the installation of glass partition. I believe you have a certain understanding of the door after the above introduction. It is recommended that you pay more attention to comparison when purchasing, and select manufacturers with good quality and after-sales service for installation, so as to facilitate later use, so as not to buy inferior products, which is not conducive to use.