感应自动门是现代建筑中常见的门禁设备，它可以通过感应器自动开启和关闭，方便人们的进出。然而，随着使用时间的增长，感应自动门也会出现各种故障，需要及时维修。济南感应门厂家将介绍感应自动门的常见故障及维修方法，帮助大家问题。

Inductive automatic doors are common access control devices in modern architecture, which can automatically open and close through sensors, facilitating people's entry and exit. However, as the usage time increases, various faults may also occur in the induction automatic door, requiring timely repair. Jinan sensor door manufacturer will introduce common faults and maintenance methods of sensor automatic doors to help everyone solve problems.

一、常见故障

1、 Common faults

1.感应器失灵：感应器是感应自动门的核心部件，如果失灵，门就无法自动开启和关闭。感应器失灵的原因可能是感应器本身故障、感应器与控制器之间的连接线路故障或者控制器故障。

1. Sensor failure: The sensor is the core component of the sensing automatic door. If it fails, the door cannot automatically open and close. The cause of sensor failure may be a malfunction of the sensor itself, a faulty connection line between the sensor and the controller, or a malfunction of the controller.

2.门扇无法关闭：感应自动门在关闭时，门扇无法完全关闭或者关闭后又自动打开，这可能是门扇与地面或者门框之间的间隙过大，或者门扇的调整螺丝松动。

2. Door leaf cannot be closed: When the induction automatic door is closed, the door leaf cannot be fully closed or automatically opened after closing, which may be due to excessive clearance between the door leaf and the ground or door frame, or loose adjustment screws of the door leaf.

3.门扇无法打开：感应自动门在开启时，门扇无法打开或者打开后又自动关闭，这可能是门扇与地面或者门框之间的摩擦力过大，或者门扇的调整螺丝松动。

3. Door leaf cannot be opened: When the induction automatic door is opened, the door leaf cannot be opened or automatically closes after opening. This may be due to excessive friction between the door leaf and the ground or door frame, or the adjustment screws of the door leaf are loose.

二、维修方法

2、 Maintenance methods

1.感应器失灵：检查感应器本身是否故障，如果故障需要更换感应器。如果感应器正常，检查感应器与控制器之间的连接线路是否松动或者损坏，如果有需要重新连接或者更换连接线路。如果连接线路正常，检查控制器是否故障，如果故障需要更换控制器。

1. Sensor malfunction: First, check if the sensor itself is faulty. If it fails, replace the sensor. If the sensor is normal, check if the connection line between the sensor and the controller is loose or damaged. If necessary, reconnect or replace the connection line. If the connection line is normal, check if the controller is faulty. If it is faulty, replace the controller.

2.门扇无法关闭：检查门扇与地面或者门框之间的间隙是否过大，如果过大需要调整门扇的位置。如果门扇位置正常，检查门扇的调整螺丝是否松动，如果松动需要重新调整螺丝。

2. Door leaf cannot be closed: First, check if the gap between the door leaf and the ground or door frame is too large. If it is too large, adjust the position of the door leaf. If the position of the door leaf is normal, check if the adjustment screws of the door leaf are loose. If they are loose, readjust the screws.

3.门扇无法打开：检查门扇与地面或者门框之间的摩擦力是否过大，如果过大需要调整门扇的位置。如果门扇位置正常，检查门扇的调整螺丝是否松动，如果松动需要重新调整螺丝。

3. Door leaf cannot be opened: First, check if the friction between the door leaf and the ground or door frame is too large. If it is too large, adjust the position of the door leaf. If the position of the door leaf is normal, check if the adjustment screws of the door leaf are loose. If they are loose, readjust the screws.

三、注意事项

3、 Precautions

1.在维修感应自动门时，需要先关闭门的电源，以免发生电击事故。

When repairing the induction automatic door, it is necessary to first turn off the power supply of the door to avoid electric shock accidents.

2.在更换感应器或者控制器时，需要选择与原设备相同的型号和规格，以免影响门的正常使用。

When replacing sensors or controllers, it is necessary to choose the same model and specifications as the original equipment to avoid affecting the normal use of the door.

3.在调整门扇位置或者螺丝时，需要使用工具，以免损坏门扇或者门框。

When adjusting the position or screws of the door leaf, it is necessary to use professional tools to avoid damaging the door leaf or frame.

总之，感应自动门的维修需要技术和经验，如果遇到故障需要及时联系维修人员进行处理。希望本文能够帮助大家更好地了解感应自动门的维修方法，保障门的正常使用。更多事项就来我们网站http://www.jnkdblgd.com咨询！

In short, the maintenance of the induction automatic door requires professional technology and experience. If there is a malfunction, it is necessary to promptly contact professional maintenance personnel for handling. I hope this article can help everyone better understand the maintenance methods of induction automatic doors and ensure their normal use. For more information, come to our website http://www.jnkdblgd.com consulting service