玻璃门安装的方法和步骤很多人还不知道，现在就跟着济南镜片安装厂家一起看看吧！

Many people do not know the method and steps of glass door installation. Now let's follow the Jinan lens installation manufacturer to have a look!

1、厚玻璃门是指用厚度超过12mm的玻璃装饰的门。

1. Thick glass door refers to the door decorated with glass with a thickness of more than 12mm.

2、一般由活动扇和固定玻璃组成，其门框分为不锈钢、铜和铝合金。

2. It is generally composed of movable leaf and fixed glass, and its door frame is divided into stainless steel, copper and aluminum alloy.

3、准备工作：施工前检查地面标高和门框顶部的结构标高是否符合设计要求。

3. Preparations: Before construction, check whether the ground elevation and the structural elevation at the top of the door frame meet the design requirements.

4、确定门框位置和玻璃安装方式。

4. Determine the door frame position and glass installation method.

5、根据设计要求选择并切割玻璃。

5. Select and cut glass according to design requirements.

6、准备好型材门框、限位槽、板材以及玻璃胶、地弹簧、木螺钉、自攻螺钉等辅助材料。

6. Prepare the profile door frame, limit slot, plate, glass glue, floor spring, wood screw, self tapping screw and other auxiliary materials.

7、固定门框放线中厚玻璃的安装要点。

7. Key points for fixing the door frame and setting out the medium thick glass.

8、根据设计要求，放出门框的位置线，确定固定件和活动件的安装控制线。

8. According to the design requirements, set out the position line of the door frame, and determine the installation control line of the fixed parts and movable parts.

9、门框顶部不锈钢限位槽的宽度应比玻璃厚度大2~4mm，槽深10~20mm。

9. The width of the stainless steel limit slot at the top of the door frame shall be 2~4mm greater than the thickness of the glass, and the slot depth shall be 10~20mm.

10、安装不锈钢贴面木底座时，先将方木固定在地面上，再将不锈钢面板粘在方木上。

10. When installing the stainless steel veneer wood base, first fix the square wood on the ground, and then stick the stainless steel panel on the square wood.

11、铝合金方管可以用铝角码固定在框架柱上，也可以用螺钉固定在预埋件上。

11. The aluminum alloy square tube can be fixed on the frame column with aluminum corner code, or it can be fixed on the embedded parts with screws.

12、切割玻璃(通常提前切割，然后钢化，然后运到现场安装)应测量实际底部、中部和顶部尺寸。

12. The actual bottom, middle and top dimensions of cut glass (usually cut in advance, then tempered, and transported to the site for installation) shall be measured.

玻璃门的全部安装过程就从12方面来讲解完毕，当然其中的注意细节也不算少，大家要及时进行了解检查，更多相关事项就来我们网站http://www.jnkdblgd.com了解吧。

The whole installation process of the glass door is explained from 12 aspects. Of course, there are not too few details to pay attention to. You should understand and check in time, and more relevant matters will come to our website http://www.jnkdblgd.com Understand.