说起玻璃门把手，很多朋友都觉得比其他门把手大。这是因为玻璃门是高度透明的，这样的设计可以让把手位置更加显眼，方便人们使用。如果忽视手柄的选择和安装，推拉时很容易损坏手柄。接下来，我们将详细介绍把手的选购技巧和安装步骤。

Speaking of glass door handles, many friends think they are bigger than other door handles. This is because the glass door is highly transparent. This design can make the handle position more visible and convenient for people to use. If you ignore the selection and installation of the handle, it is easy to damage the handle when pushing and pulling. Next, we will introduce the selection skills and installation steps of the handle in detail.

玻璃门把手选购技巧：

Purchasing skills of glass door handle:

1、玻璃门把手通常是不锈钢的，但不锈钢的种类很多。304不锈钢质量很好，光泽度高，表面光滑，经久耐用。但201不锈钢材质较差，表面无光泽，使用一段时间后会变黑，材质较差。选购时要注意区分材质。

1. Glass door handles are usually stainless steel, but there are many kinds of stainless steel. 304 stainless steel has good quality, high gloss, smooth surface and durability. However, 201 stainless steel is poor in material, with a dull surface, which will turn black after being used for a period of time. Pay attention to distinguish materials when purchasing.

2、玻璃门把手的尺寸比较大，但是选购时要根据门体的尺寸来选择，而不是说尺寸越大越好。把手的规格也应符合玻璃门把手的孔距，否则无法安装。

2. The size of the glass door handle is relatively large, but it should be selected according to the size of the door body, not that the larger the size, the better. The specification of the handle shall also comply with the hole spacing of the glass door handle, otherwise it cannot be installed.

3、如果不知道如何判断材质和质量，可以购买质量好的产品。这种方法简单快捷，为选择困难的朋友省时省力。

3. If you don't know how to judge the material and quality, you can buy high-quality products. This method is simple and fast, saving time and effort for choosing difficult friends.

济南玻璃门把手安装步骤：

Installation steps of Jinan glass door handle:

1、选择有把手孔距的玻璃门把手，检查各部件是否能与孔口紧密连接。如果太紧，请用钻机小心展开。如果太松，请用胶带将零件包裹起来。

1. Select the glass door handle with handle hole spacing, and check whether each component can be closely connected with the hole. If it is too tight, use a drill to carefully unfold it. If it is too loose, wrap the part with adhesive tape.

2、先拆开玻璃门把手，再在把手孔处组装。在插入孔的地方涂上一些玻璃胶。把手和玻璃门的根部用螺丝固定，保证不会松动。

2. First disassemble the glass door handle, and then assemble it at the handle hole. Apply some glass adhesive to the insertion hole. The handle and the root of the glass door are fixed with screws to ensure that they are not loose.

3、玻璃门与把手连接后，安装玻璃门把手的其他部分，然后调整水平位置。门两侧的把手应对齐，两扇门上的把手也应对齐。检查各部件安装稳固后，即可正常使用。

3. After the glass door is connected with the handle, install other parts of the glass door handle, and then adjust the horizontal position. The handles on both sides of the door shall be aligned, and the handles on both doors shall also be aligned. After checking that all components are installed stably, they can be used normally.

安装手柄时，仔细检查零件是否能与孔紧密连接。如果太紧，应该用钻头小心地展开。如果太松，请用胶带将零件包裹起来。

When installing the handle, carefully check whether the parts can be closely connected with the hole. If it is too tight, it should be spread out carefully with a drill bit. If it is too loose, wrap the part with adhesive tape.

济南玻璃门是由许多五金配件和玻璃组成的。安装本产品时，不仅要注意门的玻璃，更要注意把手。以上就是内容。您可以关注我们的网站www.jnkdblgd.com了解更多详细信息。

Jinan glass door is composed of many hardware fittings and glass. When installing this product, pay attention not only to the glass of the door, but also to the handle. The above is the content. You can follow our website www.jnkdblgd Com for more details.