Now the induction door has been seen everywhere in life, can always give a person a feeling of science and fashion, so ji 'nan induction door slow response and door motionless how to do? This is also a common problem when using sensor gates.

　　济南感应门反应迟缓问题：

　　1、感应门反应迟缓有很多原因，可能是感应探头的探测范围太小，或是探头内部有积尘现象，导致感应门反应太慢。

　　2、也有可能是门体太重，超出了主机的电机牵引力。

　　Ji 'nan induction gate slow response problem:

　　there are many reasons for the slow response of the induction gate. It may be that the detection range of the induction probe is too small, or there is dust accumulation inside the probe, leading to the slow response of the induction gate.

　　it is also possible that the door body is too heavy, beyond the motor traction of the host.

　　济南感应门门扇不动问题：

　　Ji 'nan induction door door fan motionless problem:

　　1、感应门门扇不动是很常见的问题，你可以检查下感应门是否有电，如果感应门断电的话门扇就不动，直接接上就可以了。

　　induction door door fan motionless is a very common problem, first of all, you can check whether the induction door has electricity, if the induction door power off the door fan will not move, directly connected to it.

　　2、其次，仔细看看感应门是否有拖地现象，如果有这种现象，门在起动时会很吃力，而感应门的主控制器会因为阻碍物而自锁保护，使门扇停止运动。

　　secondly, take a close look at the induction door whether there is a dragging phenomenon, if there is this phenomenon, the door will be very difficult to start, and the main controller of the induction door will be self-locking protection because of obstruction, so that the door fan stops moving.

　　3、也可以检查下感应感应门是否安装了"光线",因为光线的受光器上有灰尘覆盖也会引起误动作,使感应门主控制误认为有物体在门扇中间,从而停止开关门。

　　you can also check whether the induction induction door is installed with the "safety light ", because the safety light is covered by dust on the light device will also cause the wrong action, so that the main control of the induction door is mistaken for objects in the middle of the door, so as to stop opening and closing.

　　济南感应门开关声音很大问题：

　　Ji 'nan induction door switch sound is very big problem:

　　1、门扇吊具的走轮因长时间的运行会有一定的磨损，这也会影响感应门的使用，如果出现的只是轻微磨损，可以对轨道和走轮进行一次清洗，也可以给走轮的轴承加一点润滑油，就可以恢复感应门的使用了。

　　The running wheel of the door fan spanner will have certain wear due to long time operation, which will also affect the use of the induction door. If there is only slight wear, the track and the running wheel can be cleaned once, and the bearing of the walking wheel can also be added with a little lubricating oil, so that the use of the induction door can be restored.

　　2、有时候感应门部分金属连接件也会有松动现象，只需重新加固即可。

　　sometimes part of the metal connector of the induction door will also have loose phenomenon, only need to re-reinforce.

　　济南感应门反应迟缓及门扇不动怎么办？以上我们讲解了相关的内容，希望能够帮助到您。另外要注意，并不是感应门不需要保养坏了修就可以了，感应门的售后维修也很重要。相关内容的了解您可以来http://www.jnkdblgd.com这里。

　　Ji 'nan induction door slow response and door fan motionless how to do? Above we explained the relevant content, hope to help you. In addition, we should note that it is not the induction door that does not need maintenance to repair it, and the after-sales maintenance of the induction door is also very important. You can go to http://www.jnkdblgd.com.