Jinan glass door is a product with good light transmittance, but some friends reported that the glass door is prone to mildew after a period of use. Do you know the reason for the mildew on the glass door? How to quickly clean the mildew from the glass? Do you know the specific method? Next, let's have a look!

一、我们来看看玻璃门表面产生霉斑的原因

1、 First, let's look at the causes of mildew on the surface of glass doors

济南玻璃门的成型是一个工业问题。发霉的主要原因是玻璃生产过程中含有一些碱金属离子。为了降低成本，在传统熔融法制备玻璃制品的过程中，选择纯碱作为熔剂，导致玻璃制品在一定条件下(俗称模具)容易风化。玻璃成型(又称防碱)是由于储存时间长或天气潮湿而引起的化学反应。

The molding of Jinan glass door is an industrial problem. The main reason for mildew is that there are some alkali metal ions in the glass production process. In order to reduce the cost, soda ash is selected as the flux in the process of preparing glass products by traditional melting method, which leads to the easy weathering of glass products under certain conditions (commonly known as mold). Glass forming (also known as alkali proof) is a chemical reaction caused by long storage time or wet weather.

在阳光的照射下，它的表面会出现彩虹、霉菌、水印、油印、纸纹等。玻璃在门上的成型通常发生在浮法玻璃的空气表面(上表面)，因为浮法玻璃的下表面与锡液接触，表面渗透着一层薄薄的锡，保护着玻璃。

Under the sunlight, rainbow, mold, watermark, mimeograph, paper grain and so on will appear on its surface. The molding of glass on the door usually takes place on the air surface (upper surface) of float glass, because the lower surface of float glass contacts with tin liquid, and a thin layer of tin permeates the surface to protect the glass.

二、济南玻璃门表面霉斑怎么去除?

2、 Jinan glass door surface mildew how to remove?

1.调整氢氟酸(HF)与水的比例1:8，擦拭玻璃。注意：一定要防腐蚀，皮肤一定不能接触HF，否则会严重腐蚀!擦完玻璃后，用清水再擦一遍，然后擦干玻璃。

1. Adjust the ratio of hydrofluoric acid (HF) to water 1:8 and wipe the glass. Note: be sure to prevent corrosion. The skin must not contact HF, otherwise it will be seriously corroded! After wiping the glass, wipe it again with clean water, and then dry the glass.

2.用氢氟酸(HF)擦拭，注意1比8的比例，轻松去除玻璃模具。

2. Wipe with hydrofluoric acid (HF), pay attention to the ratio of 1 to 8, and easily remove the glass mold.

济南玻璃门出现发霉，主要是因为它的储存环境有问题，长时间的经历风吹雨打，出现霉斑也很正常，我们在使用的时候，好好的维护清理就可以了，关于清理的方法，上述内容中也已经为大家详细的总结完，大家可以参考应用

The moldy glass door in Jinan is mainly due to the problem of its storage environment. It is normal to have moldy spots after a long time of wind and rain. When we use it, we can maintain and clean it well. The above contents have also been summarized in detail for you. You can refer to the application