Before decoration, we should first choose the office glass partition decoration company to plan and design our own office space. In the design process, we should consider many factors involved in office decoration, because office decoration project is a diversified construction process, involving many conventional important projects in office decoration. Different office decoration projects often play a decisive role in office decoration. Here, several common office partition decoration projects in Jinan are listed as follows:

一、消防工程

1、 Fire engineering

大部分办公室装修都要隔断。如果隔断到顶，需要换烟雾传感器，物业公司一般会要求业主或者装修公司自行，如果这样的话就要找有那些有资质的消防公司，消防公司按照规定还要报批当地消防局进行审批，这个时间通常要7~10天，另外在报批消防局是有一定费用的。

Most office decoration should be separated. If the partition reaches the top and the smoke sensor needs to be replaced, the property company will generally require the owner or decoration company to solve it by themselves. In this case, it is necessary to find those qualified fire companies. The fire companies also need to report to the local fire department for approval according to the regulations. This time usually takes 7 ~ 10 days. In addition, there is a certain fee in the report to the fire department for approval.

二、留意空调

2、 Pay attention to air conditioning

同样，办公装修中也需要划分空间，所以需要考虑每个空间都要预留一定数量的空调出风口和回风出风口，所以也需要找有正规资质的空调安装公司。这里，基于空调的考虑，还涉及到我们的办公室隔断墙是否做到顶，比如德鲁克隔断公司近期完工的江苏造纸厂的工程中，就是由于考虑到空调，所以不能做到顶，不过，虽然隔断墙没有做到顶(按照消防要求，顶部空出300mm距离)，不过，空出的部分可以做格栅处理，美观时尚。

Similarly, space division is also required in office decoration, so it is necessary to consider that a certain number of air conditioning outlets and return air outlets should be reserved in each space, so it is also necessary to find an air conditioning installation company with formal qualification. Here, based on the consideration of air conditioning, it also involves whether the partition wall of our office can be topped. For example, in the project of Jiangsu paper mill recently completed by Drucker partition company, it can not be topped because of the consideration of air conditioning. However, although the partition wall does not reach the top (300mm is left on the top according to the national fire control requirements), however, The spare part can be treated with grille, which is beautiful and fashionable.

三、强弱电

3、 Strong and weak current

这是办公隔断墙装修工程中的要点，因为关系到整个公司的正常工作，不能忽视。由技术人员到现场进行实际测量，把强弱电的预留开关，插座以及各种线路走向全部体现规划到图纸上，然后交与物业公司审核。

This is the key point in the office partition wall decoration project, because it is related to the normal work of the whole company and can not be ignored. Technicians shall go to the site for actual measurement, reflect the reserved switches, sockets and various line directions of strong and weak current on the drawings, and then submit them to the property management company for review.

四、办公家具

4、 Office furniture

因为大多数办公室都需要办公室玻璃隔断，很多线路，插座都要与隔断相连接的，所以家具公司一定要与电器工程师有个机密的衔接，图纸好要先由这两方共同确定好。

Because most offices need office glass partitions, and many lines and sockets must be connected with the partitions, the furniture company must have a confidential connection with the electrical engineer, and the drawings should be jointly determined by the two parties first.

安装办公室玻璃隔断时，一定要注意每一个安装细节，确保安装正确、准确。同时，由于使用的型材容易划伤皮肤，操作时也要注意人身，避免划伤或其他伤害。

When installing the office glass partition, be sure to pay attention to each installation detail to ensure correct and accurate installation. At the same time, because the profile used is easy to scratch the skin, pay attention to personal safety during operation to avoid scratches or other injuries.