Causes and avoidance of glass partition cracks in Jinan. The distance between laminated glass can make your home very beautiful, but everything can't be flawless. The beautiful back also has many defects. For example, wall plastering between laminated glass always shows cracks and weak equipment. So what are the reasons for the cracks in the spacing display, and how should the community owners avoid this kind of phenomenon? Let's take you to master all the basic knowledge.

济南玻璃隔断出现裂缝的原因，口上方的一小块混凝土加气块，放在两块板设备后面，隔墙板两侧的粘结砂浆被混凝土加气块碰掉，使板缝间的抹灰砂浆不圆，批腻子时容易在这里产生裂缝。

The cause of cracks in Jinan glass partition is that a small concrete aerated block above the opening is placed behind the two plate equipment, and the bonding mortar on both sides of the partition plate is knocked off by the concrete aerated block, so that the plastering mortar between the plate joints is not round, and cracks are easy to occur here when applying putty.

由于批腻子底层不整平，使灰尘薄厚不匀称，薄厚不一样很大时，在砂浆枯燥乏味硬底化的系统进程中，则发病不等量的减少，随后展现缝隙。由于规划方案不周到或工程施工顺序机构过失，批量腻子后，管道穿过墙壁打孔，墙面因强烈冲击振动而出现不规则裂缝。

Because the putty bottom layer is not leveled, the dust thickness is uneven, and the thickness is very different. In the systematic process of boring and hard bottom of mortar, the incidence of unequal reduction, and then show cracks. Due to the thoughtfulness of the planning scheme or the negligence of the engineering construction sequence organization, after batch putty, the pipeline passes through the wall to punch holes, and irregular cracks appear on the wall due to strong impact and vibration.

济南玻璃隔断避免裂纹的方法，即夹层玻璃之间的距离非常简单，所以在设备和维护的系统过程中，要特别注意距离的维护。准确应用清理间距材料，避讳一些高 强 度、强酸强碱浸蚀液针对夹层玻璃表面的伤害。

The method to avoid cracks in Jinan glass partition, that is, the distance between laminated glass is very simple, so special attention should be paid to the maintenance of distance in the process of equipment and maintenance system. Clean the spacing materials accurately, and avoid the damage of some high-strength, strong acid and strong alkali etching solution to the surface of laminated glass.

在设备系统的过程中，严禁随意摇晃和重器尖锐物体碰撞，防止夹层玻璃滑落。夹层玻璃之间的间隔应消 除易燃物块，并确保间隔表面的定期清洁，使您的间隔展现整齐shu适的气体。

In the process of equipment system, it is strictly prohibited to shake at will and collide with sharp objects of heavy equipment to prevent the laminated glass from sliding. The interval between laminated glass should eliminate inflammable blocks and ensure that the surface of the interval is cleaned regularly to make your interval show neat Shu and suitable gas.

为了防止间隔出现裂纹，归根结底还是要从数据质量入手，选择质量可靠的数据，能帮你省下不少时间，一起，多注意数据的清洁养护，然后玻璃间隔才能长期使用下去。

In order to prevent cracks in the interval, in the final analysis, we should start with the data quality. Selecting reliable data can help you save a lot of time. Together, pay more attention to the cleaning and maintenance of the data, and then the glass interval can be used for a long time.